est-2 relays latch after reset

Post Reply
raydaviesjr
Posts: 10
Joined: Wed Dec 21, 2011 5:58 pm

est-2 relays latch after reset

Post by raydaviesjr »

did anyone have relays not restore after panel alarm for fan/doors
Leo
Site Admin
Posts: 889
Joined: Thu Dec 11, 2008 7:52 am

Re: est-2 relays latch after reset

Post by Leo »

how is it turn on when an alarm is activated, Common Alarm output or rules
if the output device is a Common Alarm output I am thinking it should just follow the alarm.
raydaviesjr
Posts: 10
Joined: Wed Dec 21, 2011 5:58 pm

Re: est-2 relays latch after reset

Post by raydaviesjr »

some are programed as doorcontrol/and fancontrol i have several panels
after alarm some releys wont reset.when i check status they are still active. the only way is to restart cpu
i have tryed several other ways
Leo
Site Admin
Posts: 889
Joined: Thu Dec 11, 2008 7:52 am

Re: est-2 relays latch after reset

Post by Leo »

can you program the outputs as "Common Alarm output" this way the outputs will follow the panels alarm with no programming.
if you want I could look at it, if so pm me
Post Reply