2-SDU Version 3.3 Download

Post Reply
Leo
Site Admin
Posts: 887
Joined: Thu Dec 11, 2008 7:52 am

2-SDU Version 3.3 Download

Post by Leo »

Download-> 2-SDU Version 3.2
Download-> 2-SDU Version 3.3

Download-> 2-SDU Version 3.0
Download-> 2-SDU-30SP1.exe



Incremental improvements, plus UL 864 9th Edition compliance!
With EST2 Version 3.2 comes a whole range of features and upgrades from firmware to hardware. UL 864 9th Edition enhancements include updated 2-SDU v3.2, while remaining compatible with existing projects created with v3.1 or earlier. These improvements increase the capability of your system and ensure your projects meet 9th Edition compliance. You do not need to request this upgrade; it is automatically shipped to you when you place your order!

New firmware upgrades include the following...
AC Fail - 9th edition, 1-3 hour selection
RM1 support - Signature Riser Monitor Module
Supervisory duct selection for SIGA-PS, SIGASD
NFPA 72 off normal reminder
Four-state phone support
Integrated dialer settings stored 2-SDU w/2-DACT
New hardware upgrades include the following...
2-MCM(N) main controllers
2-LCX loop expander
2-LSRA/SMDN remote annunciator

** If you are replacing an old MCM with a new one with Firmware 2.5 you will NEED V3.2
logyalarm
Posts: 1
Joined: Wed Sep 18, 2013 6:21 pm

Re: 2-SDU Version 3.2

Post by logyalarm »

I recently acquired an est-2 and hooked up a DB-9 cable I made from the panel to a computer running XP. What is the easiest way to set up the programming software without a software key?
Attachments
CAM00174.jpg
Post Reply