Secure Perfect

AKA-Casi Rusco, Software-Facility Commander panel-M5/M3000, Cards-PXNplus, 8RP
Post Reply
Leo
Site Admin
Posts: 889
Joined: Thu Dec 11, 2008 7:52 am

Re: Secure Perfect

Post by Leo »

most likely you will scrap the GE system, maybe keep the cards/fobs
I have work on Secure Perfect and Mirco-5 for a lot of years, it is old and not a very good system, also everything about is expensive.

You will go out of your mind trying to get Secure Perfect up and running

if you are in the phila/south jersey area PM me.
matt_84
Posts: 1
Joined: Wed Jun 06, 2018 6:02 pm

Secure Perfect

Post by matt_84 »

Hello everyone! I know the software is old but I my company has recently purchased a building that has a GE Security door controller. The previous tenants pulled all of their hardware and the left the controller intact. I need to program the gates for new codes as they never left us the codes and in order to do this I believe I need a copy of Security Perfect to interface with the controller. Would anyone be able to help me out? I just need it a trail or temporary copy until we can get the system replaced.

Thanks,

Matt
Post Reply