Facility Commander

AKA-Casi Rusco, Software-Facility Commander panel-M5/M3000, Cards-PXNplus, 8RP
Post Reply
Eagle00708
Posts: 15
Joined: Tue Feb 15, 2011 8:08 am

Facility Commander

Post by Eagle00708 »

I have a facility that is running Facility Commander 7.7. The customer wanted to add a button to lock all doors acroos 15 different controllers. We are using output groups and set up an alarm. When tested the doors, all of them lock and then unlock. I have had tech support look into it, they are testing some stuff on the bench but I'm just looking for some outside input.
Leo
Site Admin
Posts: 887
Joined: Thu Dec 11, 2008 7:52 am

Re: Facility Commander

Post by Leo »

I do not work with FC any more, but 2/3 years ago when I did I was dealing with this same thing.
it worked the only problem was that after the lock down was turned off (the input want normal) no-admin card holders were still not able to get in. the panels needed to be download to fix the problem.

I think also I had the inputs reversed, when the input was normal the school was in lock down.
Post Reply