EST IO 64/500 SYSTEM

Post Reply
Firetech1701A
Posts: 20
Joined: Thu Mar 31, 2011 8:18 am

EST IO 64/500 SYSTEM

Post by Firetech1701A »

The company I work for is about to take over the service contract on Hotel with a IO 500. Has anyone worked on this system before. I have done work EST Q.S and EST 2 system but have never seen a IO 500. I'm going to guess the software requires a dongle like the EST 2 and 3. If anyone has any information please respond.

Thank you
Jim
FVILLA
Posts: 138
Joined: Tue Oct 13, 2009 3:41 pm

Re: EST IO 64/500 SYSTEM

Post by FVILLA »

Firetech1701A wrote:The company I work for is about to take over the service contract on Hotel with a IO 500. Has anyone worked on this system before. I have done work EST Q.S and EST 2 system but have never seen a IO 500. I'm going to guess the software requires a dongle like the EST 2 and 3. If anyone has any information please respond.

Thank you
Jim

Hi Jim, the IO series have both programming options, from the keybord panel or software (no key required) and have almost the same programming rutines as the Quickstart systems.
heres the link to the manual

http://www.bassunited.com/downloads/man ... Manual.pdf

regards...
Firetech1701A
Posts: 20
Joined: Thu Mar 31, 2011 8:18 am

Re: EST IO 64/500 SYSTEM

Post by Firetech1701A »

Thank you very much. Also what is the current software for this system. I found a copy on my other laptop. Just want to make sure I have the most up to date copy.

Thanks again
Jim
bongky
Posts: 30
Joined: Wed Apr 06, 2011 8:13 am
Contact:

Re: EST IO 64/500 SYSTEM

Post by bongky »

hi all,anyone now where ican get about the new version of io-cu software? ihave the old version 3.3. the software cannot be delayed for the alarm.thx
jjaimevera
Posts: 10
Joined: Fri Feb 10, 2012 12:46 am

Re: EST IO 64/500 SYSTEM

Post by jjaimevera »

mguerard
Posts: 1
Joined: Tue Dec 03, 2013 10:41 am

Re: EST IO 64/500 SYSTEM

Post by mguerard »

Hi,

Is that still the latest version?
bongky
Posts: 30
Joined: Wed Apr 06, 2011 8:13 am
Contact:

Re: EST IO 64/500 SYSTEM

Post by bongky »

hii,

hi everyone can i get io-cu software ver 3.5..

thx verymuch
trugg
Posts: 2
Joined: Wed Feb 01, 2017 5:22 pm

Re: EST IO 64/500 SYSTEM

Post by trugg »

Is 3.4 the latest version of this program?
Leo
Site Admin
Posts: 889
Joined: Thu Dec 11, 2008 7:52 am

Re: EST IO 64/500 SYSTEM

Post by Leo »

Post Reply