IO-CU IO64 IO500 software download

Leo
Site Admin
Posts: 887
Joined: Thu Dec 11, 2008 7:52 am

IO-CU IO64 IO500 software download

Post by Leo »

Download
IO-CU_Setup_3.5
IO-CU_Setup._3.4
IO-CU_Setup4.0
IO-CU_Setup4.1


FSA-CU Version 3.5 and Firmware Version 2.3 Release Notes
https://www.edwards-signals.com/index.c ... l=25&sid=0

remember:
WHEN YOU INSTALL AND RUN FOR THE FIRST TIME, YOU CREATE YOUR OWN PASSWORD


search words:
EST io64 software
IO500 IO1000
I/O 3.5 software
I need IO-CU ver 3.5
vectrasoundz
Posts: 8
Joined: Sun Oct 22, 2017 7:10 pm

Re: IO-CU IO64 IO500 software download

Post by vectrasoundz »

Hi, any chance you have 4.1?
AZFIREGUY
Posts: 1
Joined: Mon Sep 24, 2018 12:02 pm

Re: IO-CU IO64 IO500 software download

Post by AZFIREGUY »

Does anyone have 4.11 IO-CU software available?
APEN
Posts: 1
Joined: Tue Oct 01, 2019 8:23 pm

Re: IO-CU IO64 IO500 software download

Post by APEN »

Hello does any one know what is the latest panel version for iOS 500. I’m getting a 5003 error code when trying to write to the panel, only then I can read from panel just fine but not write. I’m using io-cu 3.1 any help much appreciated
isatronix
Posts: 74
Joined: Fri May 04, 2018 10:00 am

Re: IO-CU IO64 IO500 software download

Post by isatronix »

hi
the latest version is 4.2 for IO-CU and VS-CU
the version of slc loop card are incompatible,
if your version data base panel is you need upgrade

Version 4.2 firmware compatibility
Panel firmware version 4.2 is not compatible with iO-CU 3.0, 3.1, 3.2, 3.31, 3.32, 3.4, 3.5, 4.0,
4.1or 4.11. If you have a panel with version 4.2 firmware, iO-CU version 4.2 or later is required.
Version 4.2 firmware is not compatible with old loop (SLC) cards. Your panel must have the
iO-SDC1 or iO-SDC2 SLC interface cards installed.

regards
Overreved
Posts: 2
Joined: Tue Sep 08, 2020 11:20 am

Re: IO-CU IO64 IO500 software download

Post by Overreved »

I cant seem to openm the IO software because its a xxx file anyone run into this.
Protecse
Posts: 2
Joined: Thu Nov 18, 2021 7:25 pm

Re: IO-CU IO64 IO500 software download

Post by Protecse »

Hola

ME PUEDEN APOYAR CON EL SOFTWARE PARA PROGRAMAR EL PANEL iO1000


srcontres@gmail.com
Protecse
Posts: 2
Joined: Thu Nov 18, 2021 7:25 pm

Re: IO-CU IO64 IO500 software download

Post by Protecse »

Necesito IO-CU ver 3.5
FVILLA
Posts: 137
Joined: Tue Oct 13, 2009 3:41 pm

Re: IO-CU IO64 IO500 software download

Post by FVILLA »

Protecse wrote: Thu Nov 18, 2021 7:41 pm Necesito IO-CU ver 3.5
http://www.thealarmtech.com/download/ES ... up_3.5.zip
jackglux
Posts: 2
Joined: Tue Dec 28, 2021 10:21 am

Re: IO-CU IO64 IO500 software download

Post by jackglux »

Can anyone resend the download for IO-CU V 4.11?
Can I use V3.5 to program a panel with V 4.11 software?

Thank You
Post Reply