How Your CS recevies Silent Knight zones

Post Reply
Leo
Site Admin
Posts: 887
Joined: Thu Dec 11, 2008 7:52 am

How Your CS recevies Silent Knight zones

Post by Leo »

How Your CS recevies Silent Knight zones

Addressable SK panels use Partitions when sending zones to a Central Station.
Partition is all so known as Area or Module
Partitions are part of the CID format.
Paritions range from 01-99
non-partition panel always use 00 as the partition number.
common use of a parition is when using one panel for more then one BA group.

Silent Knight Software Suite/SKSS, is the programming software.
SKSS does not have a report you can run that you can send to your CS.
This is one of the reasons that SK panels are shit.

I print a report of the "inputs zone point listing" to a PDF file
then copy/paste to a text file, then clean it up, then send it to my CS.
make your CS aware they need to use the partition when entering the zone number.

when using the 5820XL panel, add 200 to the module zone number.
Post Reply