Siemens FireSeeker FS-250 programming software

firetruk
Posts: 5
Joined: Sat Dec 28, 2013 6:55 pm

Re: Siemens FireSeeker FS-250 programming software

Post by firetruk »

FS-CT2 V 7.7 attached
Attachments
FS-CT2_7_7_7.exe
(15.06 MiB) Downloaded 1591 times
dougncin
Posts: 31
Joined: Tue Jan 09, 2018 9:14 pm

Re: Siemens FireSeeker FS-250 programming software

Post by dougncin »

Awesome haven’t tried it yet but I’m grateful
dougncin
Posts: 31
Joined: Tue Jan 09, 2018 9:14 pm

Re: Siemens FireSeeker FS-250 programming software

Post by dougncin »

Does anyone have the pinout for the Siemens RS232 to RJ11 adapter?
Mfssystems
Posts: 11
Joined: Sat Feb 10, 2018 11:22 pm

Re: Siemens FireSeeker FS-250 programming software

Post by Mfssystems »

I need to program an FS-250 fireseeker by Siemens.. ( need to program in 17 smokes and 2 pulls on an existing system) . Do you have a manual ? I would also consider using software to program.
Do you have pin outs on how to create download cable?
dougncin
Posts: 31
Joined: Tue Jan 09, 2018 9:14 pm

Re: Siemens FireSeeker FS-250 programming software

Post by dougncin »

I have the actual Siemens programming cable coming Monday. When I get it I will get the pinout.
Attachments
Siemens-Fireseeker-FS-250-Operation-Installation-Manual.pdf
Install/Programming Manual
(670.55 KiB) Downloaded 763 times
Mfssystems
Posts: 11
Joined: Sat Feb 10, 2018 11:22 pm

Re: Siemens FireSeeker FS-250 programming software

Post by Mfssystems »

When it says you need “configuration tool”
Are we talking about the cable?
What is part# , or better yet where can I buy cable also?
dougncin
Posts: 31
Joined: Tue Jan 09, 2018 9:14 pm

Re: Siemens FireSeeker FS-250 programming software

Post by dougncin »

Siemens 500-644138
Mfssystems
Posts: 11
Joined: Sat Feb 10, 2018 11:22 pm

Re: Siemens FireSeeker FS-250 programming software

Post by Mfssystems »

Much appreciated.
Thank you
dougncin
Posts: 31
Joined: Tue Jan 09, 2018 9:14 pm

Re: Siemens FireSeeker FS-250 programming software

Post by dougncin »

Thank you firetruk I programed my 1st FS250 by the computer today.
Nirujan
Posts: 68
Joined: Thu Sep 26, 2013 8:42 am

Re: Siemens FireSeeker FS-250 programming software

Post by Nirujan »

dougncin wrote:Looking for Siemens FireSeeker FS-250 programming software. I typically hand program thru keypad but would like to start doing on computer. I'm typically just changing monitoring info or changing descriptions on zones but still would like the software.

looks like I need Model FS-CT2 configuration tool plus software

Doug
Post Reply