Siga-sd sensitivity

Post Reply
ozman_15
Posts: 1
Joined: Tue May 24, 2016 10:31 pm

Siga-sd sensitivity

Post by ozman_15 »

I have a problem with the siga-sd showing a sensitivity on the panel as 3.5% in the maintainace report. When I go into the SDU to select a different sensitivity it does not give an option. The only selection is least sensitive.

The detector itself from the manufacturer shows .78 to 2.79 %

I am sure the detector works properly within it's range and the panel is displaying incorrectly. However the state fire Marshall does not see it this way.

What I need is to be able to select sensitivity or find a document that says the maintainace report does not display correctly for siga-sd
Post Reply