Hi!
Can any one have the modbus values of 3-EST devices (SIGA-PHS,SIGA-HRS,SIGA-278,SIGA-ST1) in alarm,Trouble & normal Condition.
Modbus Values for 3-EST Devices
Re: Modbus Values for 3-EST Devices
need the urgent support from u guys.......
Re: Modbus Values for 3-EST Devices
I am not working with the EST stuff much anymore so I am getting rusty.
but what is a "modbus value"
but what is a "modbus value"
Re: Modbus Values for 3-EST Devices
MODBUS is a protocol on which we can intigarte the est with BMS software or with any other platfrom.
MODBUS value means that every devices give a perticular value on differnt stages like alarm,trouble and in normal condition.Which we read in modbus protocol and intigrate with BMS.
MODBUS value means that every devices give a perticular value on differnt stages like alarm,trouble and in normal condition.Which we read in modbus protocol and intigrate with BMS.
Re: Modbus Values for 3-EST Devices
any one can reply.......
-
MartinTong
- Posts: 50
- Joined: Fri Jan 11, 2013 10:18 pm
Re: Modbus Values for 3-EST Devices
The attach file for your referenceBHRAGU wrote:any one can reply.......
- Attachments
-
- config.csv
- (13.29 KiB) Downloaded 409 times
-
- mapping.xls
- (45 KiB) Downloaded 345 times
-
shashishashu
- Posts: 15
- Joined: Fri Dec 14, 2012 5:15 pm
Re: Modbus Values for 3-EST Devices
First you need to customize / configure your config and mapping files. The analog values of SIG devices are attached.
Values may change based on personality. esp. for modules viz. ct1, cc1, cr etc
Values may change based on personality. esp. for modules viz. ct1, cc1, cr etc
- Attachments
-
- Change Of Values.xlsx
- (8.43 KiB) Downloaded 304 times
Re: Modbus Values for 3-EST Devices
what is the process to configure FSB-PC for modbus communication over rs4845 to DCS system?
Please provide values and sample files for configuration...
Please provide values and sample files for configuration...