need help for micro /5 px

Post Reply
fahmi
Posts: 8
Joined: Thu Oct 13, 2011 4:04 pm

need help for micro /5 px

Post by fahmi »

I have micro /5 px with p/n MD5RDSP , S/N H13Y39 27/06

i have two system Micro /5 px the first system:
This microcontroller access does not work properly , the communication power supply card power on with DS7, DS8 on and DS6 on also and DS5 flashing

about the CPU card the led D3 always flashing and the other leds does not power on

the second system

the communication power supply card power on with DS7, DS8 on and the other leds off.

about the CPU card the led D3 always on and the other leds does not power on

so that please advice for those problems
soonest
fahmi
Posts: 8
Joined: Thu Oct 13, 2011 4:04 pm

Re: need help for micro /5 px

Post by fahmi »

I have micro /5 px with p/n MD5RDSP , S/N H13Y39 27/06

i have two system Micro /5 px the first system:
This microcontroller access does not work properly , the communication power supply card power on with DS7, DS8 on and DS6 on also and DS5 flashing

about the CPU card the led D3 always flashing and the other leds does not power on

the second system

the communication power supply card power on with DS7, DS8 on and the other leds off.

about the CPU card the led D3 always on and the other leds does not power on

so that please advice for those problems
soonest
Leo
Site Admin
Posts: 889
Joined: Thu Dec 11, 2008 7:52 am

Re: need help for micro /5 px

Post by Leo »

Please explain in detail the problem.
Few techs or tech support know what the LEDs do without looking in the manual.

You have a Micro5/px which is the older board.
the download cable has odd pin outs, are you using a download cable made for downloading Micros?
are your panels working now? once a micro is powered down it needs to be loaded to work, are your panels communicating to the software?
do the micros pass the power up self test?
Post Reply