Page 1 of 1
Re: SecurePerfect 6.0 Move
Posted: Tue Oct 05, 2010 6:16 am
by Leo
it will not work, you are running SP Professional you need to upgrade to the Enterprise edition, because it is going on a server.
Re: SecurePerfect 6.0 Move
Posted: Tue Oct 05, 2010 11:02 am
by ketlage
ah ok, thanks for the info. you saved a couple of unnecessary work hours.
Re: SecurePerfect 6.0 Move
Posted: Tue Oct 05, 2010 8:08 pm
by Leo
also you will need to use Facility Commander Wnx 7.5 Enterprise Edition
check post
http://www.thealarmtech.com/forum/viewt ... p=785#p785
Re: SecurePerfect 6.0 Move
Posted: Wed Oct 13, 2010 11:05 am
by Leo
I just reinstalled sp6.1.1 to a new machine
I was able to use VM because my headend micro was connected via an IP connection (not a com port)
http://www.thealarmtech.com/forum/viewt ... p=792#p792
SecurePerfect 6.0 Move
Posted: Mon Oct 04, 2010 1:33 pm
by ketlage
We are attempting to move the Secure Perfect 6.0 installation that is currently running on a windows 200 Pro workstation to a proliant server running Windows 2003 Server.
Are there any steps or walkthroughs for this process?
Thanks