SecurePerfect 6.0 Move

Post Reply
Leo
Site Admin
Posts: 887
Joined: Thu Dec 11, 2008 7:52 am

Re: SecurePerfect 6.0 Move

Post by Leo »

it will not work, you are running SP Professional you need to upgrade to the Enterprise edition, because it is going on a server.
ketlage
Posts: 3
Joined: Mon Oct 04, 2010 1:28 pm

Re: SecurePerfect 6.0 Move

Post by ketlage »

ah ok, thanks for the info. you saved a couple of unnecessary work hours.
Leo
Site Admin
Posts: 887
Joined: Thu Dec 11, 2008 7:52 am

Re: SecurePerfect 6.0 Move

Post by Leo »

also you will need to use Facility Commander Wnx 7.5 Enterprise Edition

check post
http://www.thealarmtech.com/forum/viewt ... p=785#p785
Leo
Site Admin
Posts: 887
Joined: Thu Dec 11, 2008 7:52 am

Re: SecurePerfect 6.0 Move

Post by Leo »

I just reinstalled sp6.1.1 to a new machine
I was able to use VM because my headend micro was connected via an IP connection (not a com port)

http://www.thealarmtech.com/forum/viewt ... p=792#p792
ketlage
Posts: 3
Joined: Mon Oct 04, 2010 1:28 pm

SecurePerfect 6.0 Move

Post by ketlage »

We are attempting to move the Secure Perfect 6.0 installation that is currently running on a windows 200 Pro workstation to a proliant server running Windows 2003 Server.

Are there any steps or walkthroughs for this process?


Thanks
Post Reply