Page 1 of 4

Notifier Program - VeriFire Tools 5.7 - NO License needed

Posted: Sat Aug 12, 2017 4:25 am
by Leo

Verifire_Tools-v5_71.zip


Veri-Fire Tools - 5.71 download

Notifier's new Verifire Tools 5.9 (As of 2007) requires a License.
Version 6.8 will allow non-licensed users to perform all offline functions.
Licensed users need to re-license VeriFire tools every 18 months
The License is only good for one computer/laptop.
5.9 and higher is only good for ONYX series products. NFS-320,NFS-640,NFS-3030,NFS2-3030,NFS2-640,UDACT-2
also the new UDACT-2 is programmed with Verifire Tools 5.9




****** KNOW THIS ************
If you are not a Notifier Dealer
YOU CAN NOT USE THE NEWER VERIFIRE TOOLS SOFTWARE
version 6.8 or high
You will not be able to load the panel.
do not waste your time with it.
*******************************

you can load Verifire tools and run it.
But you cannot upload/download the panel.
it will be basically useless to you.

ALSO THE LICENSE KEY IS ONLY GOOD
FOR THE COMPUTER THE HID KEY IS GENERATED FROM.
another words: That License, That computer.
no sharing, no switching PC, no tricking it.






verifire_tools-6_80.zip
VeriFire1020v4-2.zip
VeriFire1020-4-b5.zip
verifire-ms-3_1-B2.zip

Re: Notifier Program - VeriFire Tools 5.7 - NO License neede

Posted: Fri Nov 03, 2017 1:05 pm
by euse2020
399/5000
Thank you very much add the link of this application, I have searched a lot, I would appreciate if you could inform me how I can update this program a little longer since some versions are still missing for the panel that I use. I thank you very much for the contribution since in my country Chile is very difficult any kind of support with these systems and I am even thinking about traveling to Argentina to be able to train better.

Re: Notifier Program - VeriFire Tools 5.7 - NO License neede

Posted: Fri Nov 03, 2017 3:59 pm
by FVILLA
Hi
Can help you.
I sent you a PM for details.

Regards.
euse2020 wrote:399/5000
Thank you very much add the link of this application, I have searched a lot, I would appreciate if you could inform me how I can update this program a little longer since some versions are still missing for the panel that I use. I thank you very much for the contribution since in my country Chile is very difficult any kind of support with these systems and I am even thinking about traveling to Argentina to be able to train better.

Re: Notifier Program - VeriFire Tools 5.7 - NO License neede

Posted: Mon May 21, 2018 8:43 pm
by Knightkay
I also have a 3030 nfs 2 panel and I need the verifire tool to download the firmware and use the free one. help if someone has it please V8.1
Thank you

Re: Notifier Program - VeriFire Tools 5.7 - NO License neede

Posted: Tue May 22, 2018 11:00 pm
by Hiep Nguyen
Knightkay wrote:I also have a 3030 nfs 2 panel and I need the verifire tool to download the firmware and use the free one. help if someone has it please V8.1
Thank you
Dear Knightkay,

Currently, The software need HID lincense. When you have V8.1 software, I think you can't used it.
If you have HID license, please share email: ngochiep.me@gmail.com

Thanks,
Hiep.

Re: Notifier Program - VeriFire Tools 5.7 - NO License neede

Posted: Fri May 25, 2018 9:31 am
by Chizom
HI please i will like to know if it is possible to share the link for the verifire software thank you.

Re: Notifier Program - VeriFire Tools 5.7 - NO License neede

Posted: Tue Jun 19, 2018 2:51 am
by bartyboy15
Hello Good Day guys... i would like know where can i download VERIFIRE TOOLS 6.8, non licenced only to check the status of NODES in our fire alarm system, We are using NFS2-3030 Panel (XLS3000 by Honeywell) Thank you so much.

Re: Notifier Program - VeriFire Tools 5.7 - NO License neede

Posted: Tue Jun 19, 2018 3:19 am
by bartyboy15
bartyboy15 wrote:Hello Good Day guys... i would like know where can i download VERIFIRE TOOLS 6.8, non licenced only to check the status of NODES in our fire alarm system, We are using NFS2-3030 Panel (XLS3000 by Honeywell) Thank you so much.
FYI, I tried the Australian Version VERIFIRE Tools version 9.20 build 5 .. and once i connect it and read its shows error CPU HARDWARE not compatible, but the software can read already the CPU Panel NODES and it is connected.

Re: Notifier Program - VeriFire Tools 5.7 - NO License neede

Posted: Tue Jun 19, 2018 5:45 am
by Leo
is this a license verifire tools?
if not can you get me a copy.
PM me if needed

Re: Notifier Program - VeriFire Tools 5.7 - NO License neede

Posted: Tue Jun 19, 2018 12:14 pm
by bartyboy15
Leo wrote:is this a license verifire tools?
if not can you get me a copy.
PM me if needed


I think this is NON-License software,
PM Sent