QS-Panel Password Levels

Post Reply
Leo
Site Admin
Posts: 886
Joined: Thu Dec 11, 2008 7:52 am

QS-Panel Password Levels

Post by Leo »

The QuickStart has 4 Levels of Passwords.

The default password for each level are: 1=1111 2=2222 3=3333 4=4444, the highest level is 4
The barrel Key on the front of the panel will log you into level 2
Level 2 will be able to disable/enable/activate devices
Level 3 can be change via the QS-CU program, If the default lvl 3 password has been changed, you will need to know it to load or retreive the panels database. without it you will be locked out of the panel for programming

If the lvl3 password has been changed and you do not know it, you can reset the panel (blank it out, you will lose all the database) with the Code Loader.
So you will need to rewrite the database/program, but you will not need to replace to panel.

To load the QS panel you need to be login in with a level 2 or higher. the front barrel key logs you in with a level 2 login.
getech
Posts: 14
Joined: Thu Jan 05, 2012 9:01 am

Re: QS-Panel Password Levels

Post by getech »

You can try password 3253, this password it's like level 5 password.
With this password you can change password level 4, 3 , 2, 1.
kantula
Posts: 6
Joined: Tue Apr 24, 2012 3:40 am

Re: QS-Panel Password Levels

Post by kantula »

Dear Leo
if i dont have old source and Pass, i can programming QS4 panel.
And i have a question.
with QS4 panel it can work with new detector SIGA2 of EST.
kantula
Posts: 6
Joined: Tue Apr 24, 2012 3:40 am

Re: QS-Panel Password Levels

Post by kantula »

Dear Mr Leo
d you have QS4 manual programming Document or guide, Pls sent me
kantula
Posts: 6
Joined: Tue Apr 24, 2012 3:40 am

Re: QS-Panel Password Levels

Post by kantula »

Dear Leo
I think in the EST system have a Io Series. why are you creat a topic for this panel ?
shashishashu
Posts: 15
Joined: Fri Dec 14, 2012 5:15 pm

Re: QS-Panel Password Levels

Post by shashishashu »

[quote="kantula"]Dear Leo
if i dont have old source and Pass, i can programming QS4 panel.
Yes you can program it. Retrieve the database!
And i have a question.
with QS4 panel it can work with new detector SIGA2 of EST.
Only SIGA2-PHS , SIGA2-PS, SIGA2-HRS/HFS.
shashishashu
Posts: 15
Joined: Fri Dec 14, 2012 5:15 pm

Re: QS-Panel Password Levels

Post by shashishashu »

getech wrote:You can try password 3253, this password it's like level 5 password.
With this password you can change password level 4, 3 , 2, 1.

Try 3783!!!
Tom_Witt
Posts: 1
Joined: Thu Jun 18, 2015 2:32 pm

Re: QS-Panel Password Levels

Post by Tom_Witt »

Leo, will the EST QuickStart Codeloader nuclear option for clearing out non-default passwords work with a Mirtone QuickStart. If not, was there a Mirtone CodeLoader?
Nirujan
Posts: 68
Joined: Thu Sep 26, 2013 8:42 am

Re: QS-Panel Password Levels

Post by Nirujan »

Hi,
Any one know the Access level 5 password for est3 , if yes please help me...
getech
Posts: 14
Joined: Thu Jan 05, 2012 9:01 am

Re: QS-Panel Password Levels

Post by getech »

Nirujan wrote:Hi,
Any one know the Access level 5 password for est3 , if yes please help me...

Check on your phone and the letter correspond to a number so EST3 password level 5 is: 3783
Post Reply