Hi everybody,
after have been downloaded code,database and bootstrap on an EST3 panel i see below fault message on LCD card:
1. database out of sync with cpu
2. unprogrammed device data card
3. auxiliary data card
any one can help me please to solve these fault?
many thanks.
panel programming
Re: panel programming
these are all common probables.
it sounds like you are putting a EST3 network together for the first time.
1. out of sync - load all the CPUs
2. unprogrammed device - by methodical with respect to the devices on the SLC loop and what you program in the database.
look at this posts read it 3 times it will be very helpful - "http://www.thealarmtech.com/forum/viewt ... ?f=5&t=326"
it sounds like you are putting a EST3 network together for the first time.
1. out of sync - load all the CPUs
2. unprogrammed device - by methodical with respect to the devices on the SLC loop and what you program in the database.
look at this posts read it 3 times it will be very helpful - "http://www.thealarmtech.com/forum/viewt ... ?f=5&t=326"