Honeywell make available the new Win-Pak SE/PE 2.0 Built 645.2/645.3
Combining access control, digital video and intrusion into one powerful system, Honeywell’s WIN-PAK® improves scalability, capability and control. WIN-PAK is used to program, operate and report access control events and is available in two editions:
WIN-PAK SE 2.0 (Standard Edition)
Depending on the application, choose 1 or 5 users, VISTA intrusion integration, included in all versions is basic video integration to Rapid Eye, Fusion or HRDP Series DVRs.
WIN-PAK PE 2.0 (Professional Edition)
Combines all the features of SE plus an unrestricted number of client workstations; full support for multiple department/site applications; support for multiple communication servers; VISTA intrusion and advanced video integration. All inclusive - no additional upgrades needed.
WIN-PAK optimizes system performance and total cost of ownership by supporting multiple control panel platforms—including access control, video surveillance and intrusion—from a single user interface. The benefit is seamless integration that offers a common look and feel for access control hardware as well as video and intrusion solutions. Functions that have traditionally been tied together with physical relays and input devices are now controlled logically. This simplicity gives users greater control over their systems than they had using multiple software platforms and interfaces, and is an improvement over a typical nonintegrated solution where devices are not aware of what other devices are doing. Reducing the total cost of ownership is always at the forefront of Honeywell products. Unlike other software manufacturers, Honeywell does not charge license fees per reader, which saves users money.
Quick start wizards help make WIN-PAK easy to install and program. Content-sensitive help provides instant documentation. Tips and links lead users to answers to common operating questions.
WIN-PAK's intrusion integration provides a virtual keypad for operators to view the status of their system and allows them to enter commands remotely. This is ideal for monitoring remote sites, as well as managing multiple sites from a single location. WIN-PAK simplifies the access control process and prevents false alarms by allowing users to arm or disarm the system with any valid card. It also offers video integration directly from the user interface and no longer requires relays and costly wire runs to trigger event recording. Video integration allows the operator to choose which events trigger live camera pop-ups such as video motion, power loss on access panel or invalid PIN number entered; view stored video based on filters of past events. Advanced video integration (WIN-PAK PE 2.0) adds the ability to choose which camera pre-sets should be triggered and allows the activation of multiple cameras per event, providing multiple angles to catch all the details required.
WIN-PAK offers advanced reporting capabilities that customers are demanding, so users can create customized reports or choose from a variety of predefined reports that can be emailed or exported.
Features:
Integrate access control, digital video and intrusion using Rapid Eye™ Multi-Media Series and Fusion and HRDP Series DVRs, and VISTA-128 and VISTA-250 FBP and BPT series controllers
– Arm or disarm with a card read
– Record and playback access, intrusion or video events and alarms
– Define up to four cameras and presets to respond per event (WIN-PAK PE 2.0 only)
– Programmable camera presets (WIN-PAK PE 2.0 only)
– Alarm video popup and user verification
– Synchronized video playback with access, intrusion or video events
Manage cardholders through multiple locations
Available as single or five concurrent operator workstations; unrestricted for WIN-PAK PE 2.0
Quick start setup and configuration wizards
Real-time alarm/event monitoring
– 99 priority levels
– Control and response, including acknowledge, clear, annotate, live video, recorded video
– Manual override, lock and unlock doors, shunt/unshunt zones and input points
– Manual override of system functions
- Lock and Unlock doors
- Arm/disarm partitions and zone
- Bypass/Un-Bypass Zones
– Generate predefined or customized reports using easy templates
– Schedule e-mail or printed reports
CCTV control interface to most popular matrix switchers
Schedule guard tours
Elevator control
Anti-passback processing
Content-sensitive help screens
Dynamic floor plans
– Control devices
– Floor plan linking
– Acknowledge/clear alarms
– Visual feedback
– SQL Server 2008 Express Edition R2 database included
64-bit and 32-bit supported operating systems: Windows® 7 Professional, Windows 7 Ultimate, Windows Server 2008 R2, Windows Vista Enterprise, Windows Vista Business, Windows XP Professional SP3 and Windows 2003 Server