Anyone have a list of CM (1/2) cpu options?

Post Reply
old_tech
Posts: 75
Joined: Wed Jan 23, 2013 7:30 am

Anyone have a list of CM (1/2) cpu options?

Post by old_tech »

I know they made:
CM1
CM1NX
CMIN
CMIN-SG
CM2N
CM2N-SG

We're working on a networked irc-3 system that is randomly locking up. the stiickers are missing from the main cpu card.
The main panel has only a ZB0-8 card while the cm-2n nodes are populated with zas-2 cards.
Versions of firmware aside (3.3/4/5.0/5.1/5.2), would a CM1NX or CM1N-SG be interchangable?
Like my username is, I cant find my old manuals and havent dealt with this in a loooong time.
Thanks, Pete.
Leo
Site Admin
Posts: 886
Joined: Thu Dec 11, 2008 7:52 am

Re: Anyone have a list of CM (1/2) cpu options?

Post by Leo »

its been a long time since anyone has touch an IRC3 system.

on the comm board are RS485 chips that are in sockets so they can be easily replaced.
two per CM1/2 comm board. I would just replaced them all. It is a good chance this will fix it.
bongky
Posts: 30
Joined: Wed Apr 06, 2011 8:13 am
Contact:

Re: Anyone have a list of CM (1/2) cpu options?

Post by bongky »

CM1 for zas1 but the panel cannot be network
CM1NX for zas 1 panel memory large
CMIN for zas 1
CMIN-SG zas 2
CM2N zas 1
CM2N-SG zas 2
williamjpellas
Posts: 1
Joined: Tue Feb 26, 2013 12:27 pm

Re: Anyone have a list of CM (1/2) cpu options?

Post by williamjpellas »

If anyone is interested, I work for a company that still supports the EST-IRC3 system with both parts and repairs, including most of the CPU's that went with the IRC3. Unless it's alright with the moderator, I won't publish the name of the company here on this forum. Otherwise, anyone looking for parts / repairs can send me a message through this site. Thanks.
old_tech
Posts: 75
Joined: Wed Jan 23, 2013 7:30 am

Re: Anyone have a list of CM (1/2) cpu options?

Post by old_tech »

Thanks Bongky!
Post Reply