TheAlarmTech.com

hi all; i have 4 est3 panel and 1 3-anncpu card as mimic panel , i want to share the database of this panel's how can i do this? for EX if i want to program panel #1 to goes into alam(some output module's in panel #1) with some input modules that in panel #2 what's the rule?how can i do this? is it...

b.n.f wrote:hi martin!
i try this(unplug the small card and plug again) but doesnt work and lcd display this fault again! do you have any solution else?

This means the small card was damage, your loop card is SSDC1 or SDDC1 ?

try unplug the small card and plug again

samih wrote:Dears,

I got "0604 internal fault".

it is written that it means a hardware problem in CPU (Installation & service manual ).
any suggestions to solve?

thanks in advance

may be u complies the rules, but download the database of loop controller only

BHRAGU wrote:any one can reply.......

The attach file for your reference

Nirujan wrote:

junjun wrote:Unless you are maintaining huge network or facility, restarting a panel could be a disaster.

can you explain me how it will be affect the large network?

may be the class A connection in / out wrong,

briac wrote:Hi,
S.O. can help me how to connect effectively a convetional ZITON device to an EST3 fire alarm control panel?
thanks,

use SIGA-IM or 3-IDC8/4

hi, sometime I have MAP FAULT on my installation and this map fault is comming like that and go off after 10 hours, then when I'm downloading the panel I found that some of the devices are electronically equal. MAP FAULT also is comming sometime after the downloading then I have to remap again and ...

Nirujan wrote:If I do this more time means panel will affect or not?

no affect

old_tech wrote:Martin, You mean AS

sorry , yes AS