TheAlarmTech.com

The output circuits on the esa2000 motherboard can certainly be programmed for steady output. Although all programming can be done from the display, it's VERY tedious. You really shouldn't mess with that panel, though, unless you have the rs232 interface card, and a program key to backup and restore...

Any thing changed? A label for an amp? A change to a rule to include another floor? bad devices swapped out? sdu reports only show what the current configuration is and what what it does. You could try to compare two versions of the same project, but good luck with that. The building reports file do...

See here for the generic codes you are transmitting in 4+2 format, not contact ID
http://www.thealarmtech.com/manuals/EST ... amming.pdf

If you choose to use reconfig, make sure you test the device. I've pulled the data loop on several takeovers to find devices without any labels. Without any documentation on the system it becomes a crap shoot.

F illa, it's useless without a key

The network wiring itself is probably grounded and the annunciators are probably not properly grounded

Good news is yes it will work with latest software. Bad news is system now has a bricked existing sra4 which probably occurred during codeloader update, it thinks it's panel 01 and won't accept a download to correct it. Apparently codeloader works across the network indescriminately.

the QSCU allows entry of 60zone remote annun or 'remote LCD'. thanks

Anyone have any programming tips around this? When the amp senses no input, they go into trouble

Leo wrote:does anyone know the key for this pull
EST Edwards 270-GAO Dual Stage Fire Alarm Pull Station - key

Simplex 2098-9806 supposedly is a match