TheAlarmTech.com

Hi, I have programmed many EST3 PANELS but i am programming EST3x for first time . please provide steps to program EST3x panel with One 3 sddc1 and one SFS-1 and one PS10-4b. Please suggest how theses modules will be added to SDU utility . regards AK What is the exact process to program a control pa...

Hi,

I have a IQ8control panel . i have lost installer password .

can any one tell me to how to reset password for the panel.

I have Tools 8000 software with all accessories .

regards
AK

I want to know about EST3x .

1. Same sdu software can be used for programming as EST3 panel and using est dongle ?

2. what is the difference in est3 , est3x and IO panels.

thanks in advance
ak

please share the link for sdu 5.2 . mailid: delanil@gmail.com

what is the process to configure FSB-PC for modbus communication over rs4845 to DCS system?
Please provide values and sample files for configuration...

Use SIGA-HRS in place of SIGA- PHS or SIGa-PS .

I have faced similar problem here on one of my site . I have replaced with Heat detector SIGA-HRS and now problem is resolved.

Please follow following steps: 1. Break the loop in 2 parts and do the mapping ie. break at 72 device no . and check whether it is mapping . 2. if it maps break the loop at no . Deice no 105 and increase accordingly till it completes. 3. if mapping is not done at step 1 , break the loop at 35 and do...

Please follow following Steps: 1. Upload Map for that card. 2. check mapping for difference in actual and expected Data. 3. you will find some difference . 4. Resolve the difference in Actual and Expected data . 5. Complile and download data to loop card. Please let me know if you find any difficult...

Panel :est3

Status: Panel shows rail module communication fault after download.
Earlier Panel was working fine
Please suggest a solution.




Thanks for any suggested idea..[/quote]

hI, Fibre Optics is preferred by Client . client has a 12 core fibre optic network for communication among buildings. They are providing 2-core for fire and 2 core for BMS systems in each building. Can you tell me what other accessssories required for connecting to fibre optic network. I have to con...