TheAlarmTech.com

Hi,
did you want restart each panel separatlly or each fireworks station will be reset all panels?

add the devices to the loop offline with address what you whant; delete not used address.
upload the loop add assign device s/n to the address you whant.

Which network you use ( cooper or fiber)?

Yes, you right the lights cause to faults and false alarms! You have 2 options or relocate the detector or lights( addition try to rotate the lights 180 degree, then the starter change it place and will decides you problem).

It's also can be result of shaky contact when the siga-led disconnected from the base therefore you the base type changed and you receive bad type trouble.

Hi, Ahmed! You have same problems in wiring, try check: 1. you line resistance by short of the EOL should be not more 100Ohm 2. if you use class A conect it as class B and then open line between 74 and 75 devices if you map not failed start add devices one by one until you find the problem. Update ...

Hi,
I try many USB to RS232 converters, but only one work correct with all systems that I am work.
It's Aten UC-232A it also compatible with Win7 if you need.

Hi, Ahmed! You have same problems in wiring, try check: 1. you line resistance by short of the EOL should be not more 100Ohm 2. if you use class A conect it as class B and then open line between 74 and 75 devices if you map not failed start add devices one by one until you find the problem. Update m...

Hi,
As I remember you can connect it to the CT1 with EOL resistor and test it with resistor short.

download and install primoPDF from www.primopdf.com
and you will be able print to PDF
Good Lack,
MikBZ