TheAlarmTech.com

I have an existing site with an est-2 and a 2-dact. I am trying to change the CMS phone but the 2-dact will not connect to my laptop. I hear the connect tones, but never a connection. I have tried every baud rate and I am using 2sdu 3.3 Also, the facp is routinely showing "Call out incomplete&q...

I got stuck during an SSDC database download. now cant get rid of "SDU WAITING FOR DOWNLOAD"...and it seems like the loop controller doesnt start...Any suggestions???

Not to be a wise ass, Josh, but did you Downlaod the CU to the panel or Upload the blank database to your laptop? once you send down the existing database and the panel starts up, you can compare the existing devices with the new Unconfigured Device, then locate the device in the building, accept it...

Ok, easy tasks at hand....to verify loop communication, unwire your SLC and move the loop controller to a vacant LRM slot, if the LCD displays a CONFIGURATION FAULT, the Controller is working, and move it back to the original slot, make certain to "seat" it well and lock it it. NOTE: power...

Easiest thing is to throw a 47k resistor in series with the door contact, this way when door is closed you have proper supervision, when it opens, you'll get a trouble signal.

if you are getting a mismatch in the actual vs expected devices and the mapping wont start, try re-initializing the loop. this way expected devices will be null and the loop will map the actuals and then upload loop, reconcile the map and send it back down.

Simply put, ALL CPU DATABASES must match...so if you do a DB conversion and download 1 CPU, you will have to download ALL CPUs, hopefully the 485 loop is wired where you can download all from one cabinet The OUT OF SYNC issue is when a loop controller database doesnt match the CPU database...like if...

EMAIL ZUCKMAN1@YAHOO.COM

Is it true that the software will wipe out an older HASP?

Does anyone have a copy of the 5.2 version?