Do you have an "Alarm Silence" rule? Or are you just using the pre-generated "Alarm Silence"?
Here's a rule example (Note: "as" is shorthand for alarm silence)
[Alarm Silence]
define as 'MCM*': off 'Strb_Trip',
off 'Amp_*';
Search found 14 matches
- Tue Jan 24, 2017 7:16 pm
- Forum: EST2
- Topic: alarm silence causes siga-aa50's to request backup
- Replies: 1
- Views: 3881
- Tue Apr 05, 2016 2:09 pm
- Forum: EST2
- Topic: Hyper terminal to emulate printer.
- Replies: 1
- Views: 3534
Re: Hyper terminal to emulate printer.
For EST2 the settings should be:
9600 baud rate
8 data bits
even parity
1 stop bits
none flow control
9600 baud rate
8 data bits
even parity
1 stop bits
none flow control
- Tue Dec 29, 2015 5:29 pm
- Forum: EST3
- Topic: Quickstart Panel Repeater Communication Problem
- Replies: 3
- Views: 2616
Re: Quickstart Panel Repeater Communication Problem
I know you've said the problem is resolved, but you probably want to move the annunciator power from the power supply aux power (on bottom of card) to the smk/acc power (on top of PS card next to 485). The smk/acc power is filtered power; whereas the aux power is unfiltered power. It may take years ...
- Wed Oct 14, 2015 9:37 am
- Forum: EST3
- Topic: smoke control panel (purge )
- Replies: 1
- Views: 2201
Re: smoke control panel (purge )
Dear all, I have problem with smoke control panel (purge ) ,this panel has : One 3-ANNCPU / one power module 3-EVPWR / Twelve driver module 3-EVDVROS , I configured the cabinet as 3–ANN Series and rail1 type as EV3 but all switches not working Note :this panel mentioned in assembly DRW as FSCS-4 Pl...
- Tue Oct 13, 2015 3:10 pm
- Forum: EST3
- Topic: Example project for EST3 Student Workbook
- Replies: 2
- Views: 2973
Re: Example project for EST3 Student Workbook
It was Nagy Plaza when I was there and Bill McNeill was my instructor. They must have renamed it in his honor after he passed away.
- Tue Oct 13, 2015 1:20 pm
- Forum: EST3
- Topic: Access levels for switches
- Replies: 3
- Views: 3356
Re: Access levels for switches
Configure>Project>Key Functions tabpyrosucks wrote:Any way to assign an access level of two or higher to switch on an switch/led module? (where you must log in to activate)
- Tue Oct 13, 2015 12:59 pm
- Forum: EST3 Rules
- Topic: EST3 Positive alarm sequence for vr5.2 SDU
- Replies: 2
- Views: 5840
Re: EST3 Positive alarm sequence for vr5.2 SDU
My question is, does this programming work with the current version microcode/bootloader and 3SDU? Does anyone have experience with positive alarm sequence? Is there a way to bypass the positive alarm sequence with a switch so that alarms are processed immediately? Yes it works with the most recent...
- Wed Oct 07, 2015 2:53 pm
- Forum: FireWorks
- Topic: Fireworks Software
- Replies: 6
- Views: 6632
Re: Fireworks Software
Just having the software won't do you any good. Like the EST2 and EST3, you need a HASP and PIN to run the software.
- Wed Oct 07, 2015 2:32 pm
- Forum: QuickStart
- Topic: Adding an Annunciator?
- Replies: 4
- Views: 5603
Re: Adding an Annunciator?
You'll probably need codeloader, too. Just to make sure all CPUs have the same microcodes.
- Wed Oct 07, 2015 2:17 pm
- Forum: I/O panels
- Topic: iO 1000 expected to be out 1st quarter 2016.
- Replies: 0
- Views: 4415
iO 1000 expected to be out 1st quarter 2016.
A couple of weeks ago I was in Sarasota for a day to beta test the iO 1000. It will have the same basic layout, but where the 2 SLC cards currently reside will be replaced by new SLC cards that each can handle 2 class A loops. The iO-CU was still pretty glitchy, but the layout was the same. I tried ...